Post Reply TUTO | How to draw Clothing and Fold
668 cr points
Send Message: Send PM GB Post
28 / F / Lost in the woods
Offline
Posted 4/24/08 , edited 4/25/08












_________________________________________________________________________________


Step 1: Draw a basic figure

When you first draw your character don't worry about putting clothes on yet. Instead, make sure you have them fleshed out correctly.
Here Ive included lines to help me place the waistline, boots and sleeves but no details yet.

Print this picture out and grab a pencil to follow along


Step 2: track the motion.

Clothes flow over the body like water. The folds on clothes are determined by kinetic force and gravity.

Poly is twisting at the waistline and the part of her shirt thats tucked in is pinned in place but her chest and shoulders have rotated to the left (our left) and pulled the fabric along with them. What results are sweeping lines from the shoulders to the tuck point.

Her right leg is forward which pulls the fabric tight over her upper leg and creates a fabric flow in the direction of motion.

Let's see how this works.


Step 3: Go with the flow

I now start to fill in the clothing based on the lines I discoverd on the last page.

Notice the clothing is smooth and taught over areas that are bent or push against the fabric (her left knee, her left elbow, her chest, her right thigh). Fold lines radiate out and away from the bends. Other areas of clothes in a more relaxed state, succumb to gravity and fall in downwards.

Imagine small hoola hoops around your arms, waist, neck and legs. If you raise your arm, how does the hoola hoop hang? Which part of your arm is touching the hoola hoop? The part that touches would be were the clothing would outline your arm and the folds would radiate out and away from there.


Step 4: Clean up

If you lept to the right wearing the hoola hoop. You would notice the hoop would touch our waist on the right side and hang towards the area you lept from to the left. When you landed the hoop would carry the force back to the right trying to continue in the direction you leapt towards. Clothes can be drawn in the same manner. They bunch up and hang in the opposite direction of the motion.
_________________________________________________________________________________


The most important thing to consider whenever you are drawing clothing or any type of fabric is the direction the fabric is going to be pulled in. Folds are caused wherever the fabric is being stretched or pulled; figure out how exactly you want the fabric to move, and the rest is pretty easy. Always remember to consider the figure beneath the clothing; the cloth should reveal the shape of the figure beneath. I'll go into more detail on this later.
At the left are some examples of basic types of folds. Notice the movement of each example shown; the fabric flows downward on the top left two, for they are being pulled down by gravity. This type of fold would be on something that hangs loosely, such as a cape or long shirt. On the lower left and upper right examples, the fabric is not only pulled by gravity, but stretched to the left (probably by an arm that is underneath the clothing). The folds become more horizontal than vertical the further it is stretched. Also notice how sometimes the folds are nested within one another. This will often occur at joints or areas in which loose clothing is bunched up. The lower right picture is a slightly more complex example of a more inert piece of cloth being pulled in a viarety of directions. Notice how the folds follow the direction that the cloth is being pulled in.


Here are a few more examples of basic fold shapes. On the left, the cloth is being pulled downwards by gravity and to the right by wind or motion. One the left, the long strip of cloth is bunched up near the top. Remember to use shading to give your subjects more form. Generally, you shade along a fold line, or on any places that you think a shadow would be cast. This takes some getting used to. It helps to look at actual folds sometimes to see where to shade. Sometimes, I'll sketch the drapes or a towel hung over a chair just to practice and get a better feel for how clothing is shaded.


Here are a few more random examples, of a bow and some sleeves. The most important thing to note here is the shape of the folds at the joint of the sleeve in the middle.


These are some more complex, overlapping and nested folds. The more detail you put into it the folds, the more interesting it will look. On the left, notice how the fabric bunches up where it is tied together; the weight of the fabric pulls it down and causes extra creases and folds to form where it is gathered together. The tie itself is drawn with lots of detail, and the cloth beneath it blows loosely in the wind. The fabric is shaded around the folds and in the crevasses formed by the cloth. On the picture to the right, a length of fabric is draped upon the floor; notice how the folds nest in one another and overlap, creating an interesting effect.


Another thing I want to point out is the thickness of the fabric in question. The fabric on the top example appears thinner than the fabric in the lower example. Take note of both collars. On the top, the circular rim of the collar connects directly to the rest of the collar, while on the bottom, there is a space between the circular rim and the vertical part. The same applies to the edges of the cape. While on the top example, the edge is crisp and thin, on the bottom example there is extra space between the rim and the rest of the cape. This extra space makes the clothing look more thick and heavy.


Now that we know a few of the basic shapes of folds in fabric, let's move on and see how clothing should look when it is actually being worn by someone. At the left, we have an example of a very loose, draping sleeve. As mentioned before, the main thing to consider is which direction the fabric will be pulled. The sleeve here is being pulled in two main directions: downwards because its pulled by gravity, and to the left because its attached to the main garment and is being stretched across the arm and torso. The folds in the sleeve will follow the direction that the cloth is being pulled. Notice also how the cloth bunches up around the wrist. This isn't necessary, but it does indicate the length and looseness of the sleeve.


Here are three more sleeve examples. These sleeves are not as loose as the one shown above, and all stick pretty close to the arm. In these examples, the cloth is stretched from the arm to the shoulder and torso, rather than being pulled down mainly by gravity. There isn't enough material to be pulled down too greatly. Since the fabric is pulled horizontally, the folds should reflect this. The best example is the top picture here; notice how the folds move towards the shoulder instead of towards the ground. The sleeve in the middle picture is a little looser, and is pulled down by gravity more. The sleeve in bottom picture is big and loose, but is rolled up at the elbows, and thus doesn't hang and droop as much as the sleeve in the previous example.


In all these examples, try to identify where the cloth is being pulled towards and in what direction (for example, is it being pulled roughly towards the shoulder, or draping loosely over the subject?). Always remember to shade wherever the light doesn't fall, such as grooves, areas inside the folds, and places where the cloth overlaps.


One small but important thing I would also like to go over before continuing is the effect that stripes can have. If you are drawing clothing that has stripes or a pattern on it, make sure that the pattern moves along with the rest of the fabric. Where the cloth bends, the stripes and patterns will bend, as well. This can be difficult to draw and shade, especially when you are dealing with complex patterns, but it can add a really nice three dimensional look to your picture.


Now that we know some basic shapes and know a little more about how clothing should fit on your subject, let's work on the actual parts of your character's wardrobe. We'll start off by going over basic shirts. Whatever type of shirt you draw, there are some basic places where folds will occur. Sleeves will be stretched towards the shoulder. Fabric generally gathers and bunches up around the armpits and waistline. If you are drawing a character with a heavy jacket or a loose shirt, the fabric should be thick and baggy and full of folds and creases, while if it is a tighter fitting garment, the clothing will stick pretty close to your subject (which is why it is important to be able to draw bodies; I have found that you cannot always cover up your entire character with really loose clothing to hide the fact that you aren't very strong in figure drawing. ^_~)


Here are some better examples of various shirts and clothing for the upper body. Notice that while some clothing fits closer to the body than other clothing, you still see many folds where ever the fabric is being stretched. Generally, you'll see folds the most at the armpits, upper portions of sleeves, waistlines, and depending on how tight the outfit is, the chest (as shown in the lower two examples). Also make sure that any seams that are visible on the clothing follow the shape of the cloth and the character that is wearing it. ^_^


All right, let's work on the pants (something that I personally sometimes find a little daunting... ^.^;) I have noticed that guy's pants tend to be a little looser, while girl's pants cling closer to the subject. Also take note that female's rears tend to be more round, while guy's are tend to be flat and squared off (a rather strange observation, I know. ^_^;) No matter which gender you are drawing, the fabric will gather around the lower waist, knees, and ankles. The cloth around the upper and lower legs is generally pulled straight down by gravity and won't have too many folds, unless the leg is lifted up, in which case you'll have folds similar to the sleeves on the previous page.


Here are two more examples of clothing for the lower body. The one the left is an example of really loose, baggy pants. The material is has more folds than normal pants, and in this case gathers at the ankles. Notice how poofy the pants get below the knees. The example on the right is just showing how no matter what you character is wearing, you need to consider the form of the figure beneath the clothing. In this case, the clothing is relatively tight, but hangs down past the knees, and thus is drawn a little tighter around the rear. Also notice how the loose fabric bunches up right above and below the belt. That concludes my tutorial on drawing clothing. It isn't the most organized tutorial, but I'm hoping that it covers enough areas so that it can be of some help to you. ^_^
_______________________________________________________________


You would think the buckle is simple but most people represent it as a square box on a thick line. A little attention to detail will make your pics looks sharper. Draw the buckle as shown here with the strap overlapping the back end of the buckle and ticking into the loop.


Here's a Quick Release buckle..used for military type characters. The strap is made of webbing instead of leather. The buckle is undone by pressing the tabs toward each other and pulling the ends apart.


Zippers are usually represented as a zig-zag if you are distanced from your character. but for close ups, try and make it like you see here. Each "tooth" is a small square with a circle on top of it..they interlock as shown here. It takes a little extra time but people notice the effort.


Snaps are pretty straight forward and you don't really get to see the 2 halves together unless the jacket is open. Again, good for detail in a close up. Show the one docking end smaller and rounded on the lip.


Laces are often represented as criss cross lines. It looks better if you draw the laces as 3D objects rather than a quick line. Show them overlapping each other and passing through the eyelets. Also, since the laces are pullig toward each other there will be buckling in the material around the stress points. Notice how I curved the material around the eyelets to show that. The tongue of the shoe/boot should push through the criss cross a little bit to give the impression that the laces are cinched down on the shoe.

Good Luck!^^
Posted 4/25/08
Holy shiznizzles!! This is awesome!!!
Member
55864 cr points
Send Message: Send PM GB Post
F / nxt 2ur place^_^
Offline
Posted 4/29/08
dis is very gud 4beginner
Member
218 cr points
Send Message: Send PM GB Post
24 / F / U.S.
Offline
Posted 5/1/08
lol, i doubt I'll ever be able to draw folds and clothing this well ^-^l||
668 cr points
Send Message: Send PM GB Post
28 / F / Lost in the woods
Offline
Posted 5/2/08

AyamexXxUchiha wrote:

lol, i doubt I'll ever be able to draw folds and clothing this well ^-^l||


Of course u will. just practice and you´ll learn it.^^ don´t give up.
Member
24929 cr points
Send Message: Send PM GB Post
100 / M / A Big Round Plane...
Offline
Posted 5/2/08
nice tips ^^
Posted 5/2/08
lol
this is tutorial is mixed

like it BTW!!!
Member
17848 cr points
Send Message: Send PM GB Post
27 / M / Joo Shin EmPiRe O_O
Offline
Posted 5/18/08
(っ’_’)っShin* THnx FoR THe TiPs o_O
Member
4623 cr points
Send Message: Send PM GB Post
23 / F / th grotty shit ho...
Offline
Posted 6/28/08
i can't follow this XD i suck
Member
4820 cr points
Send Message: Send PM GB Post
25 / F / Germany
Offline
Posted 7/12/08
xD that's reaaally goood :-D xD now I only have to practice till I look like this °__° xD <- just a joke
Member
667 cr points
Send Message: Send PM GB Post
28 / M / Cavite /Philippines
Offline
Posted 8/15/08
yo tnx... this will help me a lot ^^
Posted 12/31/08
I'll try this... I doubt my skills though.. LOL
Member
3249 cr points
Send Message: Send PM GB Post
22 / F / art room (room 203)
Offline
Posted 10/22/09
thank u very much!
Member
166 cr points
Send Message: Send PM GB Post
26 / F
Offline
Posted 11/26/09
omg tnx sooooooo mucho
You must be logged in to post.